They needed a solution that not only restores the former beauty of the solid oak flooring but is also easy to look after and furthermore can take a lot of traffic.
We suggested an oil finish for 2 main reasons:
Floor Sanding Process
The floor was well fitted and there was no need for any floor repairs. The Oak floor is hardwood, so it is very crispy and if moisture levels are fine it sands very nicely.
First, we removed the old finish to avoid any unwanted reaction with a new finish. The next few sanding steps were polishing steps to get the oak floor to a scratch-free look. After every step of sanding, we got on our hands and knees to make sure the sanding was adequate.
We carried out as much sanding during the first day to allow the family to use the floor in the evening and we started in the early morning the following day in order to apply oil as soon as possible.
The next morning we removed the marks caused by the night before use and finished off the floor with 2 coats of Magic Oil from Pallmann. Magic Oil only requires 4h to allow light traffic and 12h to be fully cured, so they could resume normal life with very little disruption,
Results after floor sanding and oiling
Feedback from the client
The client loved the outcome – a very natural and fresh look. He was a bit concerned as the oiled floors seemed unprotected. We did this job before Christmas and schedule the visit after New Year’s to assure the client that there was nothing to worry about. Magic Oil that we have used protects the wood from within and seals it. They have the best product on the market and a 2-year warranty on the finish from us as approved Parkettprofi contractors.
We visited the client in February and he was no longer concerned about the floor. He was very happy with the end finish of the floor and its performance over the holiday season. Also considering doing the same in his living room in the near future.