Learn how to safely clean natural stone floors without etching or staining. From daily care to what to avoid.
Read more

Published on 25 Mar 2020
You mop your tiled floor regularly, yet the grout lines still look grey, dark or grubby. It is one of the most common reasons people call a cleaning service, and it is rarely down to a lack of effort. The tile and the grout are two different surfaces, and grout is far better at holding on to dirt.
Before reaching for a stronger product, it helps to understand why the grout got dirty in the first place.
This guide explains how to clean floor grout step by step, which products are worth using, and when cleaning has reached its limit and the grout needs repairing or regrouting instead.
To clean grout on a tiled floor, including a ceramic tile floor:
The key word is compatibility. A product that is safe for the tile is not automatically safe for the grout, the sealer or the material next to it.
Most often, grout is simply dirty from foot traffic, and it shows the dirt sooner than the tile or stone around it. Traditional cement-based grout is porous, so it soaks up soil, moisture, grease and cleaning residue much more readily than a glazed tile does. It also sits slightly below the tile surface, so grit, dust and pet hair collect in the grout lines.
Dirty mop water makes the problem worse. Once the water turns grey, you are no longer removing dirt, you are moving it around the floor and into the grout lines.
Sometimes it is not soil but staining. Ink is a good example: it can penetrate grout much deeper than dry soil particles. Oil-based stains and make-up behave in a similar way, and even ordinary soil can work its way deep if it is left for too long. Whether a stain can be removed depends on:
Kitchen grout tends to collect grease and food-related grime. Bathroom grout has to cope with water, soap residue, humidity and, in some cases, mould or mildew. Different grout types, such as cement, epoxy, coloured and sealed grout, also need different treatment, so it is worth knowing what you have before you start.
The first approach to grout cleaning is always the same: brush it out, with chemical help if needed. Depending on the sample and our judgement, we choose the most suitable method, but the basics never change. We work to CHAT: Chemicals, Heat, Agitation and Time. You can read more in our guide to the basics of cleaning everything.
We can never say exactly how bad the grout on a floor is until the work is done. Stains occur randomly and hide among the general soil, and they only show once all of the grout and tile has been cleaned. That is true of every stain on every type of flooring. Some jobs need additional work, and no approach can guarantee that every stain will be removed.
The most important thing is regularity. Clean little and often and you will not need our help as frequently, which saves you money. If the tiles themselves need attention too, our guide to cleaning ceramic floor tiles safely and effectively covers the whole floor.
Vacuum or sweep up dust, grit, crumbs and pet hair before any water or chemicals go near the floor. The less dry soil there is, the less there is to soak into the grout. If you start wet-scrubbing a gritty floor, you create a dirty slurry that gets pushed into the grout lines.
Establish what you are dealing with. Is the grout simply dirty, stained, mouldy, or cracked and crumbling? Those are different problems with different solutions. Coloured grout needs particular care, because unsuitable chemicals can change its appearance.
Never assume a cleaner is suitable just because its label mentions tiles. Test a small amount in an inconspicuous area, rinse if the instructions say so, let it dry completely, then check for colour change, dullness or damage. This matters most with coloured grout, unknown sealers and older floors.
Work on a manageable area rather than the whole floor at once, using the manufacturer’s recommended dilution. More chemical does not mean a better clean. It makes rinsing harder and leaves more residue behind.
This is the “T” in CHAT. Allow the cleaner to dwell for the time the manufacturer specifies so it can loosen the grime before you agitate it. Patience also reduces the temptation to scrub far too hard. Do not let the product dry on the floor unless the instructions say that you should.
Use a nylon grout brush and work systematically, concentrating on the grout rather than the surrounding tile. Avoid wire brushes and other highly abrasive tools, which can damage grout and mark some tile finishes.
Once the dirt is loosened, it has to leave the floor. Rinse with clean water to remove both the contamination and the cleaning solution, and change the water when it becomes dirty. Cleaner residue left behind can leave the surface sticky or dull and makes future cleaning harder. A flat mop and an appropriate cleaning product make this stage quicker.
Remove excess moisture with clean towels, a microfibre cloth or a clean mop, then give the grout time to dry properly. Wet grout always looks darker, so do not decide the clean has failed until it is fully dry.
There is no single best grout cleaner. The right product depends on the type of grout, whether it has been sealed, the kind of dirt, the condition of the floor, the surrounding materials and the manufacturer’s instructions. The aim is to use the least aggressive treatment that does the job.
For routine maintenance, a suitable pH-neutral cleaner is the sensible starting point.
For light to moderate surface dirt, mix enough water into baking soda to make a paste. Apply a small amount to the grout and leave it briefly without letting it dry solid. Agitate gently with a nylon brush, rinse thoroughly and let the grout dry before assessing the result. Baking soda is not a magic restoration product: if the grout is deeply stained, permanently discoloured or physically damaged, repeated scrubbing with a homemade paste will not fix it.
Vinegar turns up in countless DIY tips, but it is acidic. The tile may tolerate things that the grout, sealer or neighbouring materials do not. Repeated use of acidic cleaners on cement-based grout can be problematic, and acids can cause particular damage around acid-sensitive natural stone. Specialist acidic products exist for specific jobs, such as certain mineral deposits and cementitious residues, and should be used strictly as instructed. For everyday grout maintenance, a compatible routine cleaner is the better choice.
Heavier contamination can call for an appropriate oxygen-based cleaner or a purpose-made commercial grout cleaner. Some individual stains respond to hydrogen peroxide where the grout and surrounding materials are compatible. Test first, especially on coloured grout.
Bleach-containing products can suit certain situations, but they should not be the automatic first answer to dirty grout. If you do use one:
Steam can help loosen contamination on some floors, but it is not right for every installation. Consider the condition of the grout, any sealer, the tiles, the joints and any adjacent materials first. Be particularly cautious with cracked or failing grout and with older floors where previous treatments are unknown. Steam is not a repair method: if the grout is physically failing, adding heat and moisture will not fix it.
Mould needs different treatment from ordinary dirt, because cleaning the visible growth is only half the job. Persistent mould usually means there is persistent moisture to deal with as well.
Use a product suitable for the surface, ventilate the room, wear suitable protective equipment and dry the area properly afterwards. If the mould keeps returning, investigate why the area stays damp instead of repeatedly treating the symptoms. The CDC’s guidance on mould is clear that if mould is growing, you need to clean it up and fix the moisture problem, and it repeats an important safety rule: never mix bleach with ammonia or other cleaners, because the result is a poisonous gas.
White grout shows every mark, but that is no reason to clean it with the strongest product you can find. Coloured grout has its own risk: certain chemicals and stain removers can lighten or alter the colour, leaving it patchy even if it is technically cleaner. Whichever you have, test first and follow the product and grout manufacturer’s guidance.
If you have cleaned properly and the grout still looks dirty, ask whether dirt is actually the problem. Several things can leave grout looking discoloured:
Recognising the difference can save a lot of pointless scrubbing.
With grout, there is another way to restore it fully: dig it out and re-lay it. This is a very different job, and very often a bigger one than the cleaning itself. It can take days. Once the floor has been regrouted, it has to wait around a week for the grout to cure properly, and only then can you seal it for better performance and additional protection.
Cleaning will not repair grout that is cracked, loose, crumbling or missing, and it will not always bring back the original colour of grout that is permanently stained. At that stage, professional grout cleaning, recolouring, restoration or regrouting may be more appropriate than scrubbing harder.
Some cement-based grout benefits from an appropriate sealer, which can help reduce staining and make ongoing maintenance easier. Not every grout system needs sealing, so establish whether yours should be sealed before applying anything. If sealing is appropriate, the grout must be thoroughly clean and sufficiently dry first, and the sealer applied according to the grout and sealer manufacturers’ instructions. Sealing improves protection, but it does not make grout maintenance-free.
Cracking grout is a different problem altogether. We can repair it, but the underlying cause lies elsewhere. If grout cracks, something is moving. Either the tile was not properly fitted, the tile itself has moved, or the whole building has shifted slightly and the grout has cracked as a result.
Nowadays you can buy flexible grout, which lowers the risk of cracking. This is not the place to save money. It is an investment, and if you buy something too cheap, it will not do what it is supposed to do. Removing old grout and regrouting is a massive job, so choose carefully: the grout, the tile fitter you employ and even the builder who constructs your house or extension.
Aggressive scrubbing makes damaged grout worse, so if you can see cracks, deal with them rather than trying to clean through the problem.
Preventing build-up is much easier than restoring heavily soiled grout.
How often a floor needs a deeper clean depends on the room, foot traffic, moisture and how the floor is maintained, so there is no single schedule that suits every home.
We are not builders or tile fitters. We focus on floors: their maintenance, their performance and their good looks. We want your floor to be a pleasure to look at and to give you peace of mind.
If repeated household cleaning is making little difference, the problem may be deep staining, cleaning residue, deteriorated grout or an old sealer. Silver Lining Floor Care provides professional hard floor cleaning in London for floors that need more than routine maintenance. We can assess what is actually happening and tell you whether the sensible next step is deeper cleaning, grout treatment or another form of floor care.
Get in touch for advice or a quote on your floors. We are here to give you the best possible solution.
Frequently Asked Questions
Sweep or vacuum first, then apply a compatible grout cleaner and allow the recommended contact time. Scrub the grout lines gently with a nylon brush, rinse with clean water and dry the floor. Start with a mild treatment and only escalate if ordinary cleaning does not remove the problem.
For light surface grime, a paste of baking soda and water is a simple option. Test a small area, scrub gently with a nylon brush and rinse thoroughly. Homemade does not automatically mean safer or more effective, and the grout manufacturer’s guidance should take priority.
First establish whether the grout is dirty or permanently stained. Clean it with a compatible product and a nylon brush, rinse well and let it dry completely before judging the result. If discolouration remains, a targeted treatment, grout colourant, professional restoration or regrouting may work better than progressively stronger scrubbing.
There is little reason to combine them for routine grout cleaning. Vinegar is acidic and should not automatically be used on cement-based grout. For mild surface grime, baking soda mixed with water is a simpler starting point.
Yes. A firm nylon toothbrush is useful for small areas. For a larger floor, a purpose-made grout brush is quicker and more comfortable.
Grout commonly looks darker when wet. Allow it to dry completely before assessing the colour. If it is still dark once dry, you may be dealing with remaining contamination or permanent discolouration.
The method depends on the tile, the grout, its condition and the type of contamination. We start by identifying the surface and the problem, give suitable cleaning chemistry time to work, agitate the grout, then thoroughly remove the loosened dirt and the cleaning solution. The difference is that the method is chosen to suit the floor, instead of treating every installation the same way.
If grout is badly cracked, loose, crumbling or missing, cleaning will not repair it. Replacement or another form of repair is the right next step.
Contact us for more information.