Basics of Cleaning
CHAT – these are the 4 basics when it comes to cleaning everything. Whether it is dishes, floor, or your skin. It is all about balance, like everything in life.
At Silver Lining Floor Care we are try to stay as eco friendly as possible, following ‘Zero Waste’ idea, we try to minimise on chemical input. Chemicals have no benefits when it comes to health, and our ultimate goal is to protect your health and those you love. At the same time we try to do as much thorough cleaning as possible when it comes to your floors as this will directly benefit your health. That is why we use….
As we minimise our chemical input we increase on heat for water used for cleaning to allow better penetration. With higher temperature water tension changes which allows water to penetrate surfaces that are being cleaned. To achieve this while cleaning your carpets, we have truck-mounted machine to increase the heat of our water to maximum instead depending on your water tap. Depending on the fibre we will make sure it is safe to use. Water is the most common solvent, and is actually very powerful, yet many people forgot about it and add sometimes unnecessary chemicals.
Since our chemical input is low, our heat is high, how about time? Instead of working with a strong chemistry, while decreasing on its power, we shall just give it a bit more time. If you are to wash your dirty frying pan, you often leave it in the sink overnight so it dissolves in most common solvent mixed with cleaning product. Dish washing chemicals are usually very strong, sometimes too strong to safely use on wool carpets. Either we leave the pre-sprayed weak chemicals or we just dedicate more time for cleaning.
This is a mechanical part of the job. Either it is a sponge when it comes to dishes or your skin. We use different types of brushes, pads for our rotary machine. We have carpet brush for agitating the prespray for carpet cleaning, diamond brushes at different grids when it comes to stone and hard floor to agitate the cleaning solution. For wood we use different grids of sanding paper to achieve desired effect.
CHAT – basics of cleaning – summary
You could wash your oily, dirty frying pan with slowly running cold water but it would just take forever and probably wasted a lot of water. You could also use some chemicals, increase temperature, leave it to sink in the warm water with some cleaning products and use the sponge to clean and rinse at the end. As I said at the beginning….
It is always about finding the right balance in these four. Very often a good chemical can be water only. It is healthier and we may spend a bit more time during agitation and boost up the heat to achieve very same results as with high chemical input in order to save on time, often with less agitation. The ‘high chemical’ methods are not necceserly great for your health, your family’s health, for technician’s health and for health of our planet.
Can you put a price tag on your health? Probably not. Can you put a price tag on time? Probably yes. This maybe one of the reasons why some cleaning firms maybe more expensive then others. Some will use strong chemistry in order to save time. We’d rather spend a bit more time and value the biggest value witch is our health. Price and value are very different aspects. It all depends on priorities.
The best way to minimise the chemical use is a good maintenance.